Skip to main content

Latest Post

What is Industry 4.0?

  What is Industry 4.0 and what are some of the technologies that are driving it? Industry 4.0 is a term that refers to the fourth industrial revolution, which is characterized by the integration of digital technologies, such as artificial intelligence, cloud computing, big data, the internet of things, robotics, and 3D printing, into the manufacturing sector. Industry 4.0 aims to create smart factories that are more efficient, flexible, and responsive to customer needs and market changes. Some of the technologies that are enabling Industry 4.0 are: - Artificial intelligence (AI) : AI is the ability of machines to perform tasks that normally require human intelligence, such as reasoning, learning, decision-making, and problem-solving. AI can help optimize production processes, improve product quality, reduce costs, and enhance customer satisfaction. - Cloud computing: Cloud computing is delivering computing services, such as servers, storage, databases, software, and analytics, ov...
Post a Comment

Events

 Event Log

IoT Club Activity-6 on 20/7/2023


Dear all the IoT club of Dept. of ECE of Pragati Engineering College in association with the Carrier guidance cell is organizing

"Hands-on work with Arduino - II"

as a part of Industry 4.0.
The objective of this event is to give a brief introduction to the role of Arduino in designing IOT structures.
Date and time:20th july.2023 at 1.00pm to 3.45pm IST venue ES-7
Thank you.

Presentations



------------------------------------

IoT Club Activity-5 on 24/04/2023




Dear all the IoT club of Dept. of ECE of Pragati Engineering College in association with the Carrier guidance cell is organizing

"Hands-on work with Arduino - II"

as a part of Industry 4.0.
The objective of this event is to give a brief introduction to the role of Arduino in designing of IOT structure.
Date and time:24th apr.2023 at 1.00pm to 3.45pm IST venue ES-7
Thank you.

Presentations


 





------------------------------------

IoT Club Activity-4 on 31/12/2022



Dear all the IoT club of Dept. of ECE of Pragati Engineering College in association with the Carrier guidance cell is organizing

"Hands-on work with Arduino"

as a part of Industry 4.0.
The objective of this event is to give a brief introduction to the role of Arduino in designing of IOT structure.
Date and time:30th Dec. 2022 at 1.00pm to 3.45pm IST venue ES-7
Thank you.

Presentations                 

Hands-on section 1 by zameel ali mohammed

------------------------------------

IoT Club Activity-3 on 15/12/2022




Dear all
The IoT Club of Dept. of ECE of Pragati Engineering College in association with Career Guidance Cell is organizing a session  on 

"Essential of programming for IoT"

as part of Industry 4.0. 
The objective of this event is to give a brief introduction to the role of C programming in designing IoT structures...

Date & Time: 15th Dec. 2022 at 1:00PM to 3:00PM IST in ES7
Thank You.







Presentations


Basic of C by K.Komali Venkateswar

Venue: ECE Block, Pragati Engineering College (Autonomous), Surampalem.

Student Coordinator: Harshitha Murthipati
Faculty coordinator: Dr. Subodh Panda, Professor ECE, Pragati Engineering College (Autonomous)

------------------------------------

IoT Club Activity-2 on 3/11/2022


Hey guys,
I am happy to inform you that (the IoT club ) Dept of ECE of Pragati Engineering College (Autonomous) in association with the carrier guidance cell is organizing a session on 
"The Fourth Industrial Revolution - 2"

3.11.2022 at 10.00 AM








Presentations


Sensors by Satya Chinmayi Maruvada
DATA UNIVERSE by Vijay Subhash Polisetti


Chief Guest: Director of Pragati Engineering College

Venue: ECE Block, Pragati Engineering College (Autonomous), Surampalem.

Student Coordinator: Devi Veera Prasad Tummala
Faculty coordinator: Dr. Subodh Panda, Professor ECE, Pragati Engineering College (Autonomous)

------------------------------------

IoT Club Activity-1 on 31/10/2022



Hey guys,
I am happy to inform you that (the IoT club ) Dept of ECE of Pragati Engineering College (Autonomous) in association with the carrier guidance cell is organizing a session on 
"The Fourth Industrial Revolution - 1"

31.10.2022 at 02.00 PM 







Presentations

AN initiation to Innovation by zameel ali mohammed


Venue: ECE Block, Pragati Engineering College (Autonomous), Surampalem.

Student Coordinator: P. Vijay Subhash
Faculty coordinator: Dr. Subodh Panda, Professor ECE, Pragati Engineering College (Autonomous)

------------------------------------

IoT club Webinar-1 on 25/10/2022


Hey guys,
I am happy to inform you that (the IoT club ) Dept of ECE of Pragati Engineering College (Autonomous) in association with the carrier guidance cell is organizing an online session on 
"Future vision of IoT and it's connectivity" 

25.10.2022 at 02.00 PM 




What is the Internet of Things?

The IoT may sound like sci-fi series where everyday objects come to life, but it's more subtle than that.

Think:

  • Smart switches that talk to the smartphone
  • Smart TV's playing videos from a laptop
  • Smart thermostats that sync with your smartwatch

What is an IoT device?

It's a physical object that connects to the internet. it can be a fitness tracker, a thermostat, a lock, or an appliance - even a light bulb.

Imagine shoes that track your heartbeat... and can flag potential health problems. You don't have to imagine - these "smart" shoes already exist!

How Did we get here?

In less than a decade we have gone from using our fingers to interacting with a device (the first touch screen device like the iPod)
  ↓
To be able to talk to our devices (asking Google on your laptop for a recipe)
 ↓
To now have devices talk to each other without our help (your phone telling your apartment thermostat that you've reached home and to turn on the A/C)



Presentation


Resource Person: Mr.V.Srikant. Asst prof... Certified IoT trainer    

Mode: Online
Platform: Google Meet
Meeting link: http://meet.google.com/ykk-vmgp-uzt

Venue: Pragati Engineering College (Autonomous), Surampalem.

Student Coordinator: MD. Zameel Ali
Faculty coordinator: Dr. Subodh Panda, Professor ECE, Pragati Engineering College (Autonomous)

Comments

Post a Comment

Popular

Playing with Buttons

Button Pushbuttons or switches connect two points in a circuit when you press them. This example turns on the built-in LED on pin 13 when you press the button. Hardware Arduino Board Momentary button or Switch 10K ohm resistor hook-up wires breadboard Circuit diagram Code // constants won't change. They're used here to // set pin numbers: const int buttonPin = 2 ;     // the number of the pushbutton pin const int ledPin =   13 ;      // the number of the LED pin // variables will change: int buttonState = 0 ;         // variable for reading the pushbutton status void setup () {   Serial . begin ( 9600 );   // initialize the LED pin as an output:   pinMode (ledPin, OUTPUT);   // initialize the pushbutton pin as an input:   pinMode (buttonPin, INPUT); } void loop () {   // read the state of the pushbutton value:   buttonState = digitalRead (buttonPin);   // Show the state of pushbutton on s...
Post a Comment
Read more

Home Automation

A smart system made by using Node MCU dev board. What is Node MCU? NodeMCU is an open-source firmware for which open-source prototyping board designs are available. The name "NodeMCU" combines "node" and "MCU" (micro-controller unit). The term "NodeMCU" strictly speaking refers to the firmware rather than the associated development kits.  Both the firmware and prototyping board designs are open source. Requirments Node MCU 4 channel relay toggle switch * 4 Hi-links (220v ac to 5v dc) Circuit Diagram Program #ifdef ENABLE_DEBUG         #define DEBUG_ESP_PORT Serial         #define NODEBUG_WEBSOCKETS         #define NDEBUG #endif #include <Arduino.h> #include <ESP8266WiFi.h> #include "SinricPro.h" #include "SinricProSwitch.h" #include <map> #define WIFI_SSID         "your wifi name"     #define WIFI_PASS         "your wifi pass" #define APP_KEY...
Post a Comment
Read more

Turn LED On and Off Through LDR

  LDR An LDR ( Light Dependent Resistor ) is a component that has a (variable) resistance that changes with the light intensity that falls upon it. This allows them to be used in light sensing circuits. A photoresistor is made of a high resistance semiconductor. Hardware Required Arduino Board LED 220 ohm resistor LDR 10k ohms resistor Circuit Diagram Code int ldr=A0; //Set A0(Analog Input) for LDR. int value= 0 ; void setup () { Serial . begin ( 9600 ); pinMode ( 3 ,OUTPUT); } void loop () { value= analogRead (ldr); //Reads the Value of LDR(light). Serial . println ( "LDR value is :" ); //Prints the value of LDR to Serial Monitor. Serial . println (value); if (value< 300 )   {     digitalWrite ( 3 ,HIGH); //Makes the LED glow in Dark.   }   else   {     digitalWrite ( 3 ,LOW); //Turns the LED OFF in Light.   } }
Post a Comment
Read more

Temperature sensor

About the LM35 The LM35 is an inexpensive, precision Centigrade temperature sensor made by  Texas Instruments . It provides an output voltage that is linearly proportional to the Centigrade temperature and is, therefore, very easy to use with the Arduino. The sensor does not require any external calibration or trimming to provide accuracies of ±0.5°C at room temperature and ±1°C over the −50°C to +155°C temperature range. One of the downsides of the sensor is that it requires a negative bias voltage to read negative temperatures. So if that is needed for your project, I recommend using the DS18B20 or TMP36 instead. The TMP36 by Analog Devices is very similar to the LM35 and can read temperatures from -40°C to 125°C without any external components Note that the sensor operates on a voltage range of 4 to 30 V and that the output voltage is independent of the supply voltage. The LM35 is part of a series of analog temperature sensors sold by Texas Instruments. Other members of the seri...
Post a Comment
Read more

MQ2 Gas Sensor

 About Gas Sensor The MQ series of gas sensors use a small heater inside with an electrochemical sensor. They are sensitive to a range of gasses and are used indoors at room temperature. The output is an analog signal and can be read with an analog input of the Arduino. The MQ-2 Gas Sensor module is useful for gas leakage detection in homes and industries. It can detect LPG, i-butane, propane, methane, alcohol, hydrogen, and smoke. Some modules have a built-in variable resistor to adjust the sensitivity of the sensor. Note:  The sensor becomes very hot after a while, don't touch it! Required  Arduino UNO Breadboard MQ-2 Gas sensor module Red, Green led 5mm 220 Ohm Buzzer The connections are pretty easy: The MQ-5 sensor Pin-> Wiring to Arduino Uno A0-> Analog pins D0-> none GND-> GND VCC-> 5V other components Pin-> Wiring to Arduino Uno D13-> +ve of buzzer GND-> -ve of buzzer D12-> anode of red light D11-> anode of green light GND-> cathode...
Post a Comment
Read more

Play a melody with a Piezo speaker

  Play a Melody using the tone() function This example shows how to use the  tone()  command to generate notes. It plays a little melody you may have heard before. Hardware Required Arduino board piezo buzzer or a speaker hook-up wires Making header file To make the pitches.h file, either click on the button just below the serial monitor icon and choose "New Tab", or use Ctrl+Shift+N. Then paste in the following code: /************************************************* * Public Constants *************************************************/ # define NOTE_B0 31 # define NOTE_C1 33 # define NOTE_CS1 35 # define NOTE_D1 37 # define NOTE_DS1 39 # define NOTE_E1 41 # define NOTE_F1 44 # define NOTE_FS1 46 # define NOTE_G1 49 # define NOTE_GS1 52 # define NOTE_A1 55 # define NOTE_AS1 58 # define NOTE_B1 62 # define NOTE_C2 65 # define NOTE_CS2 69 # define NOTE_D2 73 # define NOTE_DS2 78 # define NOTE_E2 82 # define NOTE_F2 87 ...
Post a Comment
Read more

Seven Segment Display Interfacing with Arduino

Seven-Segment Introduction  Let’s start the main part of this tutorial by answering a question: what is a seven-segment display? As its name suggests, a 7-segment device consists of 7  light-emitting diodes . These light-emitting diodes are arranged and packed inside a single display with a specific pattern in mind. If this pattern is controlled in a specific way by turning on and turning off LEDs, a seven-segment device will display a unique number. There is also an extra eighth LED on a seven-segment display which is used to display dots. This dot is sometimes used as a decimal point when we want to display a fractional value.  The picture below shows a seven-segment display and its pinout. The string of eight LEDs on the left side shows the internal connection and a picture on the right side shows how these LEDs are arranged to make a seven-segment display. Pin3 and 8 are common pins. These pins are used to provide either 5 volts or ground in common-anode and common ca...
Post a Comment
Read more

Mini Oscilloscope via Arduino Nano

What is an oscilloscope?   An  oscilloscope , formerly known as an oscillograph, is an instrument that graphically displays electrical signals and shows how those signals change over time. It measures these signals by connecting with a sensor, which is a device that creates an electrical signal in response to physical stimuli like sound, light, and heat. For instance, a microphone is a sensor that converts sound into an electrical signal. Oscilloscopes are often used when designing, manufacturing, or repairing electronic equipment. Engineers use an oscilloscope to measure electrical phenomena and solve measurement challenges quickly and accurately to verify their designs or confirm that a sensor is working properly. Scientists, engineers, physicists, repair technicians, and educators use oscilloscopes to see signals change over time. An automotive engineer might use an oscilloscope to correlate analog data from sensors with serial data from the engine control unit. Meanwh...
Post a Comment
Read more

Fade an LED

  Fade This example demonstrates the use of the  analogWrite()  function in fading an LED off and on. AnalogWrite uses  pulse width modulation (PWM) , turning a digital pin on and off very quickly with different ratio between on and off, to create a fading effect. Hardware Required Arduino board LED 220 ohm resistor hook-up wires Circuit Diagram Code int led = 9 ;           // the PWM pin the LED is attached to int brightness = 0 ;    // how bright the LED is int fadeAmount = 5 ;    // how many points to fade the LED by // the setup routine runs once when you press reset: void setup () {   // declare pin 9 to be an output:   pinMode (led, OUTPUT); } // the loop routine runs over and over again forever: void loop () {   // set the brightness of pin 9:   analogWrite (led, brightness);   // change the brightness for next time through the loop:   brightness = brightness + fadeAmount; ...
Post a Comment
Read more

Fire Alarm with arduino

Flame Sensor A  flame detector  is a sensor designed to detect and respond to the presence of a flame or fire. Responses to a detected flame depend on the installation but can include sounding an alarm, deactivating a fuel line (such as a propane or a natural gas line), and activating a fire suppression system. The IR Flame sensor used in this project is shown below, these sensors are also called  Fire sensor modules  or  flame detector sensors  sometimes. There are different types of flame detection methods. Some of them are Ultraviolet detector, near IR array detector, infrared (IR) detector, Infrared thermal cameras, UV/IR detector, etc. When fire burns it emits a small amount of Infra-red light, this light will be received by the Photodiode (IR receiver) on the sensor module. Then we use an Op-Amp to check for a change in voltage across the IR Receiver, so that if a fire is detected the output pin (DO) will give 0V(LOW), and if the is no fire the o...
Post a Comment
Read more